As a leading technology developer in the field of wave energy, NEMOS got invited to join the Horizon 2020 funded project „Space@Sea“. The consortium consisting of 17 European partners aims to provide sustainable and affordable workspace at sea by developing a standardised and cost efficient modular island with low ecological impact. In this context, NEMOS will contribute by developing technology for using wave energy from the relative motion between the separate modules. Here, enormous forces at relatively small amplitudes require a special designed PTO. NEMOS is looking forward to a fruitful interexchange of know-how within a broad international consortium.
Welcome to our news blog. We are continuing to update this blog with information about our work and recent project developments regarding the Wave Energy, Engineering and Test Facilities topics. So please do check back with us for updates and share our content. Do not hesitate to contact us for further information. RSS-Feed: https://www.nemos.org/news/?format=rss .
NEMOS is attending the Ocean Energy Europe Conference and Exhibition - a leading European event dedicated to ocean energy. We will give you an update of our current PTO status and outlook during the session “Wave Power Take Off - Have we cracked it?”. Contact Alexander Martha (email@example.com) if you want to get in touch during the 2 days conference on 25-26 October in Nantes. » Download our presentation slides here.
The diligent design of the components of our wave energy device led to the engineering of numerous innovative products, too. To put them to the acid test, we developed specific test benches in on- and offshore environment. By now, the interest in and demand for them has become so large that two new business areas arose: the engineering of innovative components and the provision of individualized test facilities. At the same time, the prototype of our wave energy converter is further being developed and will be installed in the Belgian North Sea soon. We have taken this gratifying business development as an occasion to relaunch our website and are pleased to welcome you here!
NEMOS successfully performed an in-situ soil investigation at the planned installation location near the Port of Ostend. The Cone Penetration Test (CPT) was performed using the Lynn barge from contractor Artes Depret, which carried a 20 ton CPT rig from SGS Geotechniek. The results of this test will be used to verify the stability of the research structures' foundation.
Since October 2016 NEMOS` 1:5-test device in Nissum Bredning (Denmark) has permanently been in fully automated operation, with remote monitoring from the office located in Duisburg. During the several month-long failure-free operation frequent and diverse winter storms occurred with significant wave heights of more than 1.5 m. This equates to a full scale wave height of 7.5 m.
The belt-system developed by NEMOS has been presented at the "Conference on Ocean Offshore & Arctic Engineering" (OMAE) in Trondheim. The patent pending system has been specially constructed for the rough operating conditions within the wave energy converter. Due to the innovative system a long-term operation of belts with variable driving directions is also possible for other industrial applications. » Get Full Article
After an investigative procedure lasting several months, which included a public hearing and numerous detailed examinations, the Belgian authorities have permitted the installation of the test-device in the North Sea close to Ostend. The permission includes the construction of the wave energy converter with its tower structure as well as the license to execute the planned research activities for a duration of three years.
After successful implementation in scaled field tests, the anchor systems of the NEMOS device are subjected to extensive laboratory studies. The screw anchors offer exceptional high holding capacities at low mass and can be installed with minimum noise emission. Cyclic loads expected during real operation are simulated in endurance tests, feeding empirical models for dimensioning the anchors of the large-scale device.
The Belgian shipyard "Gardec" has begun to assemble the North Sea-prototype. The tower as well as the powerhouse are being welded with steel-plates up to 50 mm thick. Thus, a new phase is beginning for the design engineers of NEMOS. After extensive R&D computations on screen, they are now attending and supervising the manufacturing.
Parallel to the endurance-test of the 1:5-device at Nissum Bredning first components of the full-scale-Prototype are being investigated on various test benches. Belts and gear shafts as well as ropes are being tested under full operating loads. To simulate realistic conditions, the ropes were sprinkled with saltwater and have already been moved through millions of cycles over pulleys with various fibers and coatings. The tests are being carried out in cooperation with Liros GmbH at the “IFT”-Institute of the University of Stuttgart within the joint research project funded by the Federal Ministry for Economic Affairs and Energy.